ElektroNorm Inspecties & Services
Home About us
Our services
How we work
Preparation
Areas
Contact Request a quote

NEN 3140 explained for business owners

StandardsReading time: 4 minutesUpdated: September 2026
Google rating: 5,0 out of 10 reviews★★★★★Rated by our clients

NEN 3140 is the standard mentioned most often and read least often. Understandably so, since it is a substantial document in technical language. Here is what it means for you as a business owner, and what you concretely have to do with it.

What the standard covers

NEN 3140 describes how to work safely with and on low voltage installations. It translates the general requirement from working conditions law, that work equipment must be safe, into concrete agreements: who may do what, how often inspections take place, and how you record all of it.

So the standard is not only about the installation, but also about the organisation around it. That part is forgotten most often.

Three things the standard asks of you

In short, the standard asks for these three things, and that is exactly what an inspector or the labour authority will look for.

  • A periodically inspected installation, with a report demonstrating it happened
  • Periodically inspected work equipment, including loose appliances and extension leads
  • Designated persons: a written record of who is instructed, who is skilled and who may carry out which work

The difference between the installation and work equipment

A Scope 8 inspection covers the fixed installation: distribution boards, cabling, earthing and protective measures. Loose work equipment, from hand tools to extension leads, falls outside that but must also be inspected.

Many companies leave that second part undone because they assume the installation inspection covers everything. During an audit that stands out immediately.

What you can arrange yourself

The designation policy is largely paperwork you can handle in house: record who may carry out which operations and make sure those people are trained for it. The inspection you outsource, because it requires independence and calibrated instruments.

During the inspection we check whether your organisation matches your installation, and note it in the report if something is missing. Not to fail you, but so you can do something about it.

In practice this subject belongs with our Thermography en Tailored inspection. There you can read how we work and what exactly is checked, or you can request a quote without obligation aan.

Further reading: SCIOS Scope 10 inspection in Utrecht, how often must your installation be inspected?, what exactly does your insurer require?.

Tip from the inspector

If you are unsure which inspection you need, send us the passage from your policy that mentions electrical work or inspection. We read those daily and can see within minutes what your situation requires.

Frequently asked questions

Is NEN 3140 the same as Scope 8?

Almost. NEN 3140 is the standard; Scope 8 is the SCIOS inspection carried out under that standard, for which a certified body may issue a certificate.

Must extension leads and tools be inspected too?

Yes, those are work equipment and also fall under NEN 3140. That is a separate inspection alongside the fixed installation. We do not carry out that inspection ourselves: we focus on the fixed installation.

What is a designated person?

Someone appointed in writing by the employer for certain electrotechnical work, and demonstrably competent for it. The standard distinguishes instructed, skilled and installation responsible persons.

Prefer personal advice?

Call us or ask your question through the form. We are happy to think along about what your situation needs.

Get in touch Request a quote

Want your installation inspected by a SCIOS certified body?

Request a quote without obligation, or call us to discuss the scope of the inspection.

Request a quote More information
Make a request