ElektroNorm Inspecties & Services
Home About us
Our services
How we work
Preparation
Areas
Contact Request a quote
Google rating: 5,0 out of 10 reviews ★★★★★
ElektroNorm Inspecties & Services

SCIOS certified inspection body

Scope 8, 10 and 12 inspections and NEN testing for businesses and owners associations. Daily in Gelderland, Overijssel and Utrecht from our base in Duiven, and available nationwide.

  • SCIOS certified for Scope 8, 10 and 12
  • A report your insurer accepts
  • Registered in the national SCIOS portal
Request a quote

Build your quote

A tailored quote without obligation in a few clicks. You finish on the quote page, with everything already filled in.

Thermografische opname van een verdeelinrichting tijdens een SCIOS-inspectie
123456
Step 1 of 6

Which inspection is this about?

Feel free to choose more than one option.

What type of building is it?

Feel free to choose more than one option.

How large is the installation?

This helps us estimate the scope properly. An estimate is enough.

When should the inspection take place?

An estimate is enough.

Add photos or drawings? (optional)

A photo of the distribution board or of the schematic helps us judge the scope. Skipping is fine too.

Where shall we send the quote?

You will receive a personal reply shortly.

Free and without obligation Quick to fill in A quick reply
3SCIOS scopes: 8, 10 and 12 100%legally valid reporting conceptclient rating 3provinces covered daily

Welcome to ElektroNorm Inspecties

Looking for a reliable partner for your SCIOS inspection or NEN testing? ElektroNorm is an officially SCIOS certified inspection body, specialised in the fire safety and occupational safety of electrical installations. From our base in Duiven we serve clients across Gelderland, Overijssel and Utrecht every day, and for larger projects and property portfolios we are available nationwide. We do not inspect on paper alone: our inspectors spent years building electrical installations themselves. That means we recognise risks faster and advise immediately on the most efficient solution. So you get more than a report, you get technical certainty.

Certified inspection body
Kiwa certified SCIOS SCIOS certified inspection body
Why choose us

Why choose ElektroNorm

ElektroNorm is a family business with a down to earth and committed approach. We believe electrical safety is more than a tick on a list: it is the basis for a safe working and living environment.

  • Hands on experience: we built these installations ourselves
  • Approachable and helpful, no rigid reporting
  • Fully unburdened, from inspection to re-inspection
  • Scope 8, 10 and 12 with one point of contact
  • Instruments from Metrel and FLIR
  • Available nationwide from Duiven, right by the A12
More about us
De unit van ElektroNorm Inspecties aan de Segment in Duiven

Craftsmanship passed down a generation

  • Google rating: concept
  • Father and son, covering every scope
  • Available nationwide from Duiven
Our services

Inspections and testing

We take the mandatory inspections for your insurer or working conditions law completely off your hands.

Metrel installation tester connected to a distribution board

SCIOS Scope 8 inspection

  • Based on NEN 3140
  • Fire and contact hazards
  • Required by your insurer
  • Meets working conditions law
FLIR thermal image of a distribution board with a hot connection

SCIOS Scope 10 inspection

  • Based on NTA 8220
  • Mandatory thermography
  • Distribution and control panels
  • Required by insurers
Close-up of a solar panel, subject of a Scope 12 inspection

SCIOS Scope 12 inspection

  • For solar installations
  • Metrel MI 3116 and Seaward PV 200
  • Structure and mounting
  • From roof to meter cupboard
Logo of the NEN 3140 standard

NEN 3140 inspection

  • Periodic inspection
  • Working and business environments
  • Fewer accidents
  • Meets working conditions law
Logo of the NEN 1010 standard

NEN 1010 inspection

  • New and modified installations
  • Inspection at commissioning
  • In line with statutory requirements
  • Report straight away
Thermal image of a distribution board

Thermography

  • Contactless measurement
  • No shutdown needed
  • Hot spots and overloading
  • FLIR thermal camera
See more services
How we work

From request to certificate

So you know exactly where you stand, from the first intake to registration in the SCIOS portal.

1

Intake and tailored quotation

No two installations are alike. We look at the size of your location and the requirements of your insurer or working conditions law. You receive a clear quotation without obligation, so you know exactly what the costs are in advance.

2

Inspection plan and confirmation

Under the SCIOS rules we draw up an inspection plan in advance. Exclusions are not permitted: we inspect the entire installation for a fully valid certificate. You return the plan signed or give your approval by email, and we agree access to all rooms.

3

The inspection on site

Our certified inspector carries out the visual check and the necessary measurements. Depending on the inspection we work with the Metrel MI 3155 and FLIR thermal cameras, and for solar panel installations with the Metrel MI 3116 or a Seaward PV 200, so that invisible fire risks come to light as well.

4

Official SCIOS or NEN report

All findings go into a clear, legally valid report, which you receive from us as soon as possible. For a SCIOS inspection we register your installation in the national SCIOS portal straight away on approval, so you are fully insured again and compliant with the law.

5

Repairs and re-inspection

If defects are found we make sure everything runs smoothly. You engage your own electrician independently and we help with any questions. After the repairs we handle the re-inspection and the final registration.

Our base

Your inspector in Duiven

ElektroNorm has a permanent location at Segment 22-G in Duiven, on the Centerpoort-Noord business park, right by the A12. From this central spot we serve clients across Gelderland, Overijssel and Utrecht every day. Because we inspect on location almost every day, we are open by appointment only. That gives us all the time to go through your technical report with you in person.

See how we work
Well prepared

How to make the inspection run smoothly

Read the full preparation guide
Instagram

Follow us on Instagram

Thermal images from the field, measurements on site and a look at the inspections we carry out every day.

Thermal image of a distribution boardInstallatietester aangesloten tijdens een inspectieZonnepanelen op een bedrijfsdakOnze unit aan de Segment in DuivenDe Metrel MI 3155 EurotestXDBedrijventerrein Centerpoort-Noord langs de A12
@elektronorm.inspecties
Reviews

What our clients say

V Viktor Kings 7 months ago
★★★★★

"The list of defects they drew up was very clear and well organised, so our installer could get straight to work. It really felt as though they were thinking along with us."

M Metin Citirki 7 months ago
★★★★★

"The Scope 10 inspection at our car rental company was carried out excellently. The report was clear and immediately usable. Our certificate arrived quickly and went straight to our insurer."

E Eray Yildirim 7 months ago
★★★★★

"Real craftsmanship. It is good to see how father and son work as a well-matched team. They are fully certified for Scope 8, 10 and 12, which gave us a lot of confidence about the fire safety of our installations."

L Lisa Meijer 8 months ago
★★★★★

"Expert, friendly and very punctual. The inspection was carried out skilfully and the explanation was clear. For a professional electrical inspection this is the place!"

a arsinio nino 8 months ago
★★★★★

"At last a report we can actually use. Very clear!"

Google rating: 5,0 out of 10 reviews★★★★★ View all reviews on Google
Working area

Active in your area

From Duiven we are on the road in Gelderland, Overijssel and Utrecht every day. For larger projects and portfolios we work throughout the Netherlands by arrangement.

Clear answers

Frequently asked questions

The questions we are asked most about SCIOS inspections, scheduling, reporting and repairs.

Why is your hands on experience an advantage for me?

Many inspectors only have theoretical knowledge. We spent years installing electrical systems ourselves. That is why we recognise risks faster, understand how your system is put together technically, and give more targeted advice on practical solutions instead of simply rejecting.

What happens if my installation fails?

No need to worry, we are here to help. We explain clearly what the defects are and make sure everything runs smoothly. You have the repairs carried out by an electrician of your choice and we help with any questions, after which we handle the re-inspection for your final SCIOS certificate.

What is the difference between Scope 8, 10 and 12?

Scope 8 covers the safety of your electrical installation under NEN 3140. Scope 10 focuses on fire safety under NTA 8220, including thermography. Scope 12 is the inspection of solar installations, from the panels on the roof to the connection in your distribution board.

May I exclude parts of the inspection?

Not with a SCIOS inspection (Scope 8, 10 and 12). Under the SCIOS rules we draw up an inspection plan in advance recording the full scope; we inspect the entire installation, so your certificate is fully valid. A NEN 3140 or NEN 1010 inspection is separate from SCIOS: there you may exclude parts or have only part of the installation inspected.

Which areas do you work in?

From our home base in Duiven we work daily in Gelderland, Overijssel and Utrecht and the directly adjoining provinces. For larger projects or portfolios we work nationwide by arrangement.

Does my business have to stop during the inspection?

No. We start with the visual check and the thermography while everything is running. For a few mandatory measurements we arrange a brief switching window in consultation, so your operation is hindered as little as possible.

Want your installation inspected by a SCIOS certified body?

Request a quote without obligation, or call us to discuss the scope of the inspection.

Request a quote More information
Make a request